High Precision Digital DDS Dual-channel Function Signal /Arbitrary Waveform Generator 60MHz

$159.99 $399.99

Package Includes:
1 x DDS Signal Generator
1 x Power Cable
1 x Data Cable
1 x BNC-BNC Cable
2 x BNC-Clip Cable

Select Your Plug Type And place your order

Clear
Model Number

Signal Generator

Display Size

2.9 Inches & Under

DIY Supplies

Electrical

Specifications

Frequency Parameters
Sine Wave(Optional) 0 Hz~20 MHz 0 Hz~30 MHz 0 Hz~40 MHz 0 Hz~60 MHz
Square Wave 0 Hz ~ 15 MHz 0 Hz ~ 25 MHz
Triangle Wave 0 Hz ~ 10 MHz
Ramp
Pulse Wave
Arbitrary Waveform
TTL/COMS
Min. Pulse Width 20 ns (All models of pulse wave minimum width can reach 20ns)
Min. Resolution 1 μHz
Frequency Accuracy +/-20 ppm
Frequency Stability +/- 1 ppm / 3 Hours
Waveform Parameters
Waveform Types Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform
Waveform Length 8192 points x 14bits
Sampling Rate 250 MSa/s
Vertical Resolution 14 Bits
Sine Harmonic Suppression ≥50 dBc ( <1 MHz ); ≥ 45 dBc ( 1 MHz ~ 20 MHz )
Total Harmonic Distortion <0.5% ( 20 Hz ~ 20 kHz ,0 dBm)
Square Rise / Fall Time ≤7 ns ( VPP < 5V )
Overshoot ≤5%
Duty Cycle 0.01 % ~ 99.99 % (Resolution 0.01 %)
Sawtooth Wave Linearity > 99 % ( 0.01 Hz ~ 10 kHz)
Output Parameters
Amplitude(VPP) Frequency ≤10 MHz: 1 mVpp ~ 20 Vpp; 10 MHz < Frequency ≤ 20 MHz: 1m Vpp ~ 10 Vpp ; Frequency> 20 MHz: 1 mVpp ~ 5 Vpp
Resolution 1mV
Amplitude Stability +/-0.5% / 5 Hours
Amplitude Flatness +/-2.5%(10 MHz)
Waveform Output
Impedance 50Ω +/-10% (Typical)
Protection All channels can work more than 60s under load short-circuit condition
DC Offset
Offset Range Frequency ≤20 MHz: +/-10V; Frequency> 20 MHz: +/-2.5V
Offset Resolution 1 mV
Phase Parameters
Phase Range 0 ~ 359.99°
Phase Resolution 0.01°
TTL Output
TTL Level Amplitude >3Vpp
Fan-out > 8 TTL LOAD
Rise/Fall Time ≤10ns
COMS Output
Low Electric Level < 0.3V
High Electric Level 1 V ~ 10 V
Rise/Fall Time ≤18
Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Input Voltage Range 1 Vpp ~ 20 Vpp
Frequency Meter Range: 0.01 Hz ~ 100 MHz; Resolution: 0.01 Hz; Sensibility: Gate Time 3 Grades (1S, 10S, 100S) Adjustable
Counter Function
Counting Range 0 ~ 4294967295
Coupling Mode 2 Kinds of Coupling Modes: DC and AC
Counting Mode Manual Operation
Sweep Function
Carrier Waveform Sine, Square, Ramp, Arbitrary (except DC)
Sweep Type Linear Sweep or Logarithm Sweep
Sweep Direction Up, Down and Roundtrip Sweep Directions
Sweep Time 0.01 s – 999.99 s/Step
Sweep Objects Frequency, Amplitude, Offset, Duty Cycle
Setting Range Starting Position and Finishing Position can be set arbitrarily
Sweep Range Decided by Parameters Setting
VCO Function(Voltage Control Output)
Modulation Signal Range to Input 0~5 V
VCO Signal Frequency Range 0-2000 Hz
VCO Control Object Voltage Controlling Frequency(VCF), Voltage Controlling Amplitude(VCA), Voltage Controlling Offset, Voltage Controlling Duty Cycle
VCO Special Function Can Amplitude Modulate(AM) or Frequency Modulate(FM) by external analog signal
Modulation Function
Modulation Type AM, FM, PM, ASK, FSK, PSK
Carrier Waveform Sine, Square, Triangle, Ramp, Arbitrary Waveform (except DC)
AM
Source Internal (CH2) / External (VCO IN Port)
Modulating Waveform Sine, Square, Triangle, Ramp, Arbitrary Waveform
Depth 0% to 120%
Modulating Frequency Internal : 1μHz~1MHz; External: 1μHz~2KHz
FM
Source Internal (CH2) / External (VCO IN Port)
Modulating Waveform Sine, Square, Triangle, Ramp, Arbitrary Waveform
Modulating Frequency Internal : 1 μHz ~ 1 MHz; External: 1 μHz ~ 2 KHz
PM
Source Internal (CH2) / External (VCO IN Port)
Modulating Waveform Sine, Square, Triangle, Ramp, Arbitrary Waveform
Phase Deviation 0° to 360°
Modulating Frequency Internal : 1 μHz~1 MHz; External: 1 μHz~2 KHz
ASK
Source Internal (CH2), External (ASK IN Port), Manual
Modulating Waveform Square with 50% Duty Cycle
Key Frequency 1μHz~10MHz
FSK
Source Internal (CH2), External (FSK IN Port), Manual
Modulating Waveform Square with 50% Duty Cycle
Key Frequency 1μHz~10MHz
PSK
Source Internal (CH2), External (PSK IN Port), Manual
Modulating Waveform Square with 50% Duty Cycle
Key Frequency 1 μHz ~ 10 MHz
Burst Function
Carrier Waveform Sine, Square, Ramp, Arbitrary (except DC)
Burst Count 1 ~ 1048575
Trigger Source Manual, Internal, External (AC/DC)
General Parameters
Display Type 2.4 inch TFT Color LCD
Save & Load Amount 20
Position 01 to 20 (01 for start default value)
Interface Interface Type USB Serial Interface
Communication Rate 115200bps
Communication Protocol Command Line Mode, providing communication protocols
Technic SMD, LSI, Reliable and Durable
Buzzer Can be turned on/off by setting
Power Supply Plug Type(Optional) US Plug / EU Plug / UK Plug
Power Voltage Range AC 100V ~ 240V
Environmental Conditions Temperature: 0°C~40°C; Humidity: <80%
Size 200 * 190 * 72 mm / 7.87 * 7.48 * 2.83 in
Weight 616 g / 21.75 oz
Package Size 27 * 21 * 9.5 cm / 10.63 * 8.27 * 3.74 in
Package Weight 1094-1124g / 38.62-39.65oz

Reviews

There are no reviews yet.

Be the first to review “High Precision Digital DDS Dual-channel Function Signal /Arbitrary Waveform Generator 60MHz”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Shipping Details

  • Please make sure shipping address is correct.
  • Items will be shipped within 3 business days after payment.
  • Please check items when delivered.

 

Ship To Shipping Cost Estimated Delivery Time Tracking Information
North America Free Shipping 15-20 days Available
Europe Free Shipping 10-15 days Available
Asia Free Shipping 5-10 days Available